The features of USB cable plug molding machine as followings :
1.Straight screw ejected assembly.
2.Two(three)-phase temperature ejected speed,backing pressure and screw speed is suitable for various plastic to confectioned.
3.Low-die fixed top active mode makes instered objecteds excellent positioned features and the machine has liftout attachment for finished goods.
4.Low-pressure closed die assembly can protect the saety of die.
5.Adopting LCD display.
Specifications:
| Injection Unit | Screw Barrel Diameter | mm | 26 | 28 |
| Injection Pressure | kg/cm2 | 1019 | 896 | |
| Max. Shot Weight | gram | 58 | 67 | |
| Max. Shot Weight | cm3/sec | 67 | 76.7 | |
| Screw Barrel Route | mm | 105 | ||
| Screw Barrel Rotary Speed | rpm | 0-200 | ||
| Nozzle Contact Force | tons | 4.45 | ||
| Nozzle Retraction Nozzle | mm | 130 | ||
| Number of Temperature Control | pcs | 2 | ||
| Clamping Unit | Clamping Force | tons | 25 | |
| Platen Size | mm | 480*310 | ||
| Distance Between Tie Bere | mm | 310*170 | ||
| Min. Mold Height | mm | 100/60 | ||
| Opening Stroke | mm | 180 | ||
| Max. Opening Mold Distance | mm | 280/80 | ||
| Ejetor Force | tons | 1.3 | ||
| Ejetor Stoke | mm | 35 | ||
| Power/Heading Unit | Max. Hydraulic Pressure | kg/cm2 | 140 | |
| Pump Output | L/min | 29.5 | ||
| Oil Resservoir Capacity | Liter | 100 | ||
| Cooling Water Consumption | L/hr | 400-600 | ||
| Pump Motor Power | kw/hp | 3.75/5HP | ||
| Barrel Heating Power | kw | 1.8 | ||
| Total Power | kw | 5.5 | ||
| Other | Machine Weight | tons | 0.68 | |
| Machine Dimension(LxWxH) | meter | 1.4*0.90*2.37 | ||
| Shipping Weight | tons | 0.88 | ||
| Shipping Measurements(LxWxH) | meter | 1.49*1.08*2.25 | ||
Specification of Plastic Injection Molding Machine
1.Hydraulic system of Plastic Injection Molding Machine:
Advanced hydraulic system design, through proportional control of pressure,
flow achieves rapid multi-level pressure, speed switching,the system configuration
is reasonable, stable and reliable. The noise is less than 75 dB. The medium and
large machine adopts a two-way cartridge inserted valve system to improve
the system of flow and speed of response, and makes the whole machine
reach the best performance.
2.Injection system of Plastic Injection Molding Machine:
2.1;The powerful double cylinder injection system is used to ensure
the steady injection motions.The screw head and anti ring made of high tenacity
steel by special heat treatment owns the features of high temperature resistance,
wear endurance and hot burnout resistance,maintaining extremely high hardness
under high temperature.The screw and barrel tube made of highgrade alloy steel
by vacuum nitriding treatment own the feature of high hardness,corrosion
resistance and wear endurance.
2.2;PID temperature control ,high precision electronic ruler and computer regulate
the speed and pressure of injection,holding on pressure ,rotating speed,back pressure to ensure the quality of formed products and continuation of production. Auto material clearing ,drooling proof,anti cold strat and time delay.The functions ensure the effcient,simple and safe operations.
3.Equipments control system of Plastic Injection Molding Machine:
It is adopted special computer of plastic-injection machine and advanced CPU
controller. Which can raise the operating speed of the control system and warm
of excess oil-temperature to ensure the working accuracy of machine.