Characteristic:
» Linear guide for injection carriage could lower the wear and tear, and make the injection control precise and stable. (Optional)
» T slot mould platen
» Apply international famous brand electric & hydraulic components.
» The injection base is modularized and could choose different matching type in accordance with injection volume.
» Smooth the mold opening speed curve design, and add the speed command to reduce the machine vibration.
» It has excellent precision control with the weight error of finished product is about 0.7% to 0.4%.
» Adopted servo power-saving system which could reduce the energy consumption 40%- 70%.
Clamp:
» Hydraulic (optional), mechanical and electric triple inter-locked safety device, mould close is not realized when open any one of the safety door.
» Low pressure mould protection device, protect mould from damage due to any foreign objects.
» Use hydraulic ejector pin to adjust traverse, eject forward and backward pressure & speed, multi action available.
» Use high precise linear transducer to inspect position, multi-zone control mould opening stroke speed and position, accurately positioned.
» Strengthen moving platen wear resistance guide way.
» Centralized lubrication system guarantee uniform oil supply for every lubrication dots.
| TECHNICAL PARAMETER TABLE | Unit | A | B | C | D | |
| INJECTION | SCREW DIAMETER | mm | 85 | 90 | 95 | 100 |
| SCREW L/D RATIO | L/D | 22.2 | 21 | 19.9 | 18.9 | |
| SHOT VOLUME(THEORETICAL) | cm3 | 2298 | 2576 | 2870 | 3181 | |
| INJECTION WEIGHT(PS) | g | 2091 | 2344 | 2611 | 2895 | |
| INJECTION PRESSURE | Mpa | 206 | 184 | 164 | 149 | |
| INJECTION RATE | g/s | 417 | 470 | 530 | 580 | |
| PLASTICIZING CAPACITY | g/s | 60 | 75 | 85 | 100 | |
| SCREW SPEED | rpm | 125 | ||||
| CLAMPING | CLAMP FORCE | kN | 6280 | |||
| OPEN STROKE | mm | 870 | ||||
| MAX.MOULD HEIGHT | mm | 900 | ||||
| MIN.MOULD HEIGHT | mm | 350 | ||||
| SPACE BETWEEN TIE BARS | mm | 850×850 (W×H) | ||||
| EJECTOR FORCE | KN | 200 | ||||
| EJECTOR STROKE | mm | 260 | ||||
| GENEREL | EJECTOR NUMBER | n | 17 | |||
| PUMP PRESSURE | KW | 16 | ||||
| PUMP MOTOR POWER | KW | 55 | ||||
| HEATING POWER | KW | 37.15 | ||||
| MACHINE DIMENSION | m | 9.5×2.3×2.7(L×W×H) | ||||
| MACHINE WEIGHT | T | 31 | ||||
| Hopper Capacity | L | 100 | ||||
| Oil Tank Capacity | L | |||||
service
Q1:Are you a trading company or a manufactory?
A1:We own a factory ourselves, and we can assure the quality we manufactured.
Q2:What’s your guarantee or the warranty of the quality if we buy your machines?
A2:We offer you high quality machines with high quality after-service. Also we have one year warranty of the spare parts, free of charge.
Q3:How can I install my machine when it arrives?
A3:We will send our engineer to your side as soon as you get all your machines ready , for testing and teaching your technicians how to run the machines.
Q4:How about the spare parts?
A4: we will offer you a spare parts list for your reference